Free pattern

Party in the Back Dress FREE pattern

It’s finally summer, so that means it’s time to wear dresses! I’m joining up again with Melissa at Melly Sews for her 30 Days of Sundresses series! You can check out my last year’s post with free pattern here and the previous year’s tutorial here. This year I decided to stick with my knit dress theme (because knits are my jam) and make a cute little sleeveless dress with a slightly gathered yoke and a super fun cut out back. So I had to name it the Party in the Back dress! :) Keep reading for the full tutorial and to download your own FREE pattern!This dress is really simple to sew and SO comfy to wear. The slightly gathered yoke gives it a little bit of interest while still letting the fabric be the focus.

Unless, of course, you’re looking at the back, and then this fun cut out is the focus!

And hopefully the fun cut out in the back is enough to distract you from the weird short hairs that are growing… I blame the baby. ;)

I have a one-size pattern (size medium) free for download. If this size doesn’t work for you, you can use this tutorial to use a pattern you have on-hand to make your own cut-out back dress.

Download Your Party In The Back Dress FREE Pattern

Quick note on fabric: you want a stable knit with good stretch. Really drapey knits will not work well for this dress.

1.Print out and tape/glue together the pattern pieces. The pattern is tiled four across.

2. Gather the front and back pieces. They are very slightly gathered until they match the front and back yoke pieces. Sew the back yoke to the back gathered piece, right sides together, and repeat with the front.

3. Cut out a strip 14.5in x 1.25in for the binding for the back cut out. Sew the binding onto the cut out, the right side of the binding to the wrong side of the cut out opening. 

4. Fold over the seam, folding the raw edge under.

5. Sew the binding down. You can do this with a double needle or a coverstitch. I used a coverstitch with a single needle.

6. Overlap the ends of the cut out about an inch to form the circle. Pin or clip together.

7. Sew the shoulders together, right sides together.

8. Sew the sides together, right sides together.

9. Cut a 24.5in x 1.25in strip for the neckline binding. Sew the short ends together, right sides together.

10. Sew to the neckline as you did with the cut-out binding. *only here, use a 1/2in seam allowance. Make sure you secure the ends of the cut-out binding in your seam.

11. You can hem the armscye with a double needle or coverstitch as I did. Or you can cut a 16.5in x 1.25in binding and sew it like the previous bindings.

12. Hem the dress to your desired length. I took a couple inches off the pattern, because I am short (5’3″) and I wanted the dress to be a fun above the knee summer length.

13. Press the bindings and hems really well.

Download Your Party In The Back Dress FREE Pattern

 This dress is super comfy and is going to be a staple in my wardrobe this summer!

To check out more sundresses, make sure you pop over to Melly Sews to see what everyone else has been sewing.

Happy sewing, friends!

 

 

SaveSave

SaveSave

SaveSave

Free Newborn Baby Hat Pattern

If you’ve been around the blog lately or following me on Instagram, you know that we’re just weeks (days??) away from welcoming baby boy number five. So I’ve been cooking easy meals and making last minute baby items. Baby pants are among my absolute favorite things to sew for babies, and I decided baby also needs some matching hats! I have a free hat pattern to share with you, so all the babies in your life can be covered from head to toe. :)free-newborn-baby-hat-pattern

Baby hats are a necessity for a fall or winter baby, and knit hats are just so cute and cozy.

dsc_8260-copy

This pattern is super quick and easy to sew! It takes less than 1/4 yard of knit fabric, so you can use up some scraps.

Supplies:

  • less than 1/4yd knit fabric
  • thread
  • serger or sewing machine that can zig-zag
  • scissors or rotary cutter

Download your FREE Newborn Baby Hat Pattern

1. After you’ve taped the pattern together, cut out your fabric. This is how the fabric looks opened up:

dsc_8117-copy

2. Fold the fabric right sides together and sew along the long curved side, leaving about 3 inches open on each end.

dsc_8124-copy

3. Fold the fabric in half, wrong sides together – this will put your seam on the inside. Fold the hat as shown in the photo below, matching up the points. You will have four layers of fabric together. Sew all four layers together from one point to the side, using either a serger or a zig-zag stitch. If you are using a serger, leave the tails long. If you are using a zig-zag stitch, be sure to back-stitch at the ends.

dsc_8128-copy

4. Turn the hat and sew together the next four layers of fabric. Again, leave the tails long if you’re using a serger.

dsc_8130-copy

5. Continue to turn the hat, matching up the four layers of fabric, and sewing them together. All the seams should be coming together at a point at the top.

dsc_8131-copy

7. When you’re finished with all the seams, it should look like the photo below. If you used a serger, tie all the tails so they don’t unravel before cutting them.

dsc_8133-copy

Now turn your hat right side out and cuff!

dsc_8273-copy

Since I don’t have a baby to model this hat yet, this old baby doll of mine will have to do. ;)

dsc_8253-copy

It’s obviously a little big for the doll, but will be perfect for baby!

dsc_8259-copy

This baby hat pattern goes perfectly with my free newborn baby pants pattern!

dsc_8250-copy

I mean seriously… how cute is this??!! I think baby might be coming in home in one of these outfits!

dsc_8283-copy

The brown striped pants were upcycled (which is also why they’re longer… since my babies tend to grow longer instead of chubbier, I didn’t bother to cut the pattern shorter to account for re-using the hem). The arrows came from Raspberry Creek Fabrics, and the plaid from Girl Charlee.dsc_8291-copy

Don’t forget to download your FREE Newborn Baby Hat Pattern!

free-newborn-hat-pattern

Happy baby sewing!

Surfer Tank – FREE tank top pattern!

Today I’m over at Our Chez Nous, helping Julie celebrate Boy Sewing Week! We all know how much I love sewing for boys, so I couldn’t pass this one up. Head over there to hear my thoughts on summer wear for boys. And as part of Boy Sewing Week, I have a free tank top pattern to share! The Surfer Tank is available in sizes 3-6. While it’s drafted for boys, you may find it appropriate for your girls too!Surfer Tank

The Surfer Tank is a pretty quick sew. I sewed these three tanks, as well as the three pairs of shorts in the picture, in a day and a half (while somehow managing to not ignore my children in the process ;)

DSC_7353 copy

It’s been pretty warm lately, with a few really HOT and humid days, so my boys have been in need of some more tank tops.

DSC_7335 copy

For this pattern, you’ll want to use a knit fabric that isn’t super thin. While that’s comfortable to wear, that can make the binding trickier to sew, so I don’t recommend it. Because the tank is a slightly looser fit, you can use a knit that has between 10-30% stretch. You can use ribbing for the bindings, but I like to use a fabric that’s similar to what the tank is made of.

DSC_7269 copy

Are you so excited to sew a Surfer Tank?! :)

Download your FREE Surfer Tank Pattern here

1.Cut out the front and back of the tank top – these will use the same pattern piece, but the front of the tank will use the lower neckline.

2. Put the front and back pieces right side together. Sew the shoulders together.

DSC_6927 copy

3. Sew down the side seams.

4. Cut out the binding pieces. Measure around the armscye/neckline. Take 85% of that number to get the length of your binding. The stretch of the fabric should go lengthwise. (If your fabric is super stretchy or a lot stretchier than the main fabric, you may have to use 80%) Each piece should be 1 1/4in. wide. Take the bindings pieces and fold them right sides together, sewing the short ends together.

DSC_6942 copy

5. With right sides together, pin the binding to the armscye/neckline. You will slightly stretch the binding.

DSC_6946 copy

6. Serge or zig-zag the fabrics together.

DSC_6947 copy

7. If you are not using a coverstitch, you will bring the binding to the wrong side of the dress, folding the raw edge under. Use a double needle to stitch it in place.

DSC_6950 copy

If you are using a coverstitch, it’s not necessary to fold the raw edge under.

DSC_6948 copy

Repeat these steps with both armholes and the neckline.

8. Hem the bottom of the tank top using a 1/2in. hem.

DSC_7368 copy

And show off those pipes!!

DSC_7182 copy

My boys are ready for summer fun in their Surfer Tanks!

Download your FREE Surfer Tank pattern here

Racerback Maxi Dress FREE pattern and tutorial

Today I’m so excited to be a part of 30 Days of Sundresses series at Melly Sews! I participated last year, and this year I’m bringing you a free pattern and tutorial for a racerback maxi dress that is super comfy and early maternity friendly! But if you aren’t pregnant, don’t worry – baby bellies are not required. ;)Free Racerback Maxi Dress Pattern

Knit dresses are easy to wear at this stage in pregnancy, because a maternity dress isn’t always necessary. I certainly won’t be able to wear this into my third trimester, but I’ll be able to wear it next summer when I’m not pregnant anymore!

DSC_6872 copy

The racerback is so fun for summer!

DSC_6840 copy

Notes on Size: This dress pattern comes in one size, and it is comparable to a ready-to-wear medium. The bust is between a 36-37in. But keep in mind that it’s a knit dress, so you may be able to fudge it a little with the right kind of fabric. I am 5’3 (and a half ;) and I made the dress an inch longer than is good for me, with a 1in. hem. So keep this in mind in case you are taller and want to lengthen your dress.

You will need to use knit fabric that has at least 30% stretch. This is super important. (If you’re a little smaller than a medium, though, you could probably get away with a knit with less stretch) I made one with about 10% stretch and it was a stretch (ha! pun intended!) to fit into it. This dress -without a baby belly- is intended to have a looser fit and not be skin tight, which is why you want more stretch.

Now let’s sew!

1.Download your FREE If Only Designs Racerback Maxi Dress pattern. Cut out your fabric. The pattern includes a 1/4in. seam allowance unless otherwise noted. *Make sure you download or export this pattern to your desktop so that you can print it from Adobe Reader*

2. Place your front and back pieces right sides together. Sew both the shoulders together.DSC_6927 copy

3. Sew down one side of the dress from armpit to bottom with a zig-zag stitch or using a serger. Then sew down the other side, stopping at around 26in. from the armpit. (This is where you are going to create the side slit – I put mine on the left side of my dress, but you can choose whichever you prefer – or both sides!) I used a serger, so I serged off the edge of my dress.

DSC_6929 copy

4. Sew a straight stitch about three to four inches with a 3/8in. seam allowance.

DSC_6931 copy

5. Serge or zig-zag the edges of the fabric from where you left off with your serging/zig-zag until slightly past your straight stitch. (If you choose not to do this, it will be fine, because knit does not fray. But it will look much nicer, especially with a serger) Press this open, all the way down to the hem.

DSC_6934 copy

6. There are two ways you can finish this side slit. You can use a coverstitch (affiliate link – this is what I use and SO highly recommend!! :) Or you can use a double needle. If you don’t use a coverstitch, you may wish to serge the raw edge of the fabric all the way to the bottom.
DSC_6936 copy

7. Fold the bottom up to your desired length and hem with a coverstitch or double needle. I use a 1in hem.

DSC_6940 copy

8. Make your arm and neck bindings. Measure your neckline and armscyes – your bindings should be 85% of these lengths. The stretch of the fabric should go lengthwise. The width of these bindings can be between 1 and 1 1/4in. (I’ll explain which I prefer and why in step 11). Sew the short ends right sides together.

DSC_6942 copy

9. With right sides together, pin the binding to the armscye/neckline. You will slightly stretch the binding.

DSC_6946 copy

10. Serge or zig-zag the fabrics together.

DSC_6947 copy

11. If you are not using a coverstitch, I recommend cutting your binding 1 1/4in. wide. You will bring the binding to the wrong side of the dress, folding the raw edge under. Use a double needle to stitch it in place.

DSC_6950 copy

If you are using a coverstitch, I prefer to use a 1in. wide binding, because it’s not necessary to fold the raw edge under.

DSC_6948 copy

Now you have a lovely racerback maxi to wear all summer long!

DSC_6865 copy

I really think that I could wear knit maxis everyday, because it kind of feels like wearing your jammies all day in this dress! Quick note: I lowered the armscye slightly after taking these pictures.

DSC_6873 copy

This dress is super quick to sew, but watch out – it’s addicting! I already made another and have a third partially sewn. I also included a cut line for making your racerback a shirt instead of a dress. I’ll share a tank top version hopefully later this week!

DSC_6833 copy

Don’t forget to download your free If Only Designs Racerback Maxi Dress pattern, whether or not you’re sporting a baby belly. ;)

DSC_6835 copy

Happy sewing! Make sure you check out the other lovely sundresses as part of the 30 Days of Sundresses series!

Sundress2016Logo-Smaller

Tie T-Shirt Tutorial and FREE appliqué pattern!

If you ask me, there are few things cuter than brothers in matching shirts. For Valentine’s Day this year, I made my boys these super adorable tie t-shirts, but how great would these be for Easter as well?! You can whip one of these up with this free tie appliqué pattern!

Tie Tshirt TutorialThese t-shirt ties are easy to make and you can make them for any holiday – or even everyday wear!

tie shirt tutorial for boysSupplies:

  • t-shirt
  • woven (non-stretchy) fabric
  • sewing machine/thread
  • scissors
  • pins
  • optional: Wonder Under (affiliate link)

1. Download and print out the Tie Tshirt Pattern. Use it to trace and cut your tie(s).tie tutorial step 1

2. Pin the fabric onto the front of the t-shirt. The top of the tie pattern has a curve that follows the neckline, so you can pin it right underneath the neck. Optional: fuse your tie fabric to the front of the T-shirt using Wonder Under – this will help your tie to stay in place without shifting.tie tutorial step 2

3. Using a wide but short zig-zag stitch, sew along the outside of the tie. Keep the tie fabric flat. I like to go over my stitching a second time to make sure the fabric is secure in place.tie tutorial applique step 3

Tip: when stitching the tie, you’ll have to finagle your shirt a bit. I recommend beginning on one side, sewing down to the bottom. Then, start back at the top and sew to the bottom along the opposite side.tie tutorial step 3

I used the same pattern for both my two and four year olds, without changing the size, but you could easily scale the pattern up or down to make it suited for an older or younger child.boys valentine shirt

Then pop those shirts on your little cutie patooties! And share your photos with me on Instagram, so I can see your sweet boys in their tie tees.free pattern for boys tie tshirt

Brothers in matching shirts – seriously, is there nothing quite so adorable?!boy valentine tie shirt

DOWNLOAD YOUR FREE TIE PATTERN HERE

Now go make your little men some adorable tie T-shirts!Tshirt Tie FREE pattern and tutorial

Happy sewing!

Handmade Gifts for Boys 2015 Giveaway and Wrap-up!

40-handmade-gifts-for-boys

The fourth annual Handmade Gifts for Boys series has come to a close! Stacey and I always have so much fun bringing you new ideas for gifts to make your kiddos. Hopefully you’ve found an idea or two and have been inspired to make your boys (or girls!) some gifts this year. Keep reading through the end of the post for two FANTASTIC giveaways with multiple winners!

Handmade Gifts For Boys 2015

1. Trading Card Carrier
2. DIY Wooden Scrap Tank
3. DIY Indoor Hopscotch Mat
4. Mini-me Apron and Tutorial
5. Snake Softie FREE pattern and Tutorial
6. 15+ Softie pattern round-up
7. Floor Cushion (with hidden storage) Tutorial
8. Lego Minifig Doll
9. Alex and Anna – Sweet Dreams Jammies
10. Happy Feet Pajamas

To find the tutorials from the previous years, click these images:

Handmade Gifts For Boys 2014

2014

handmadegiftscollage 2

2013

handmade-boy-gift-wrap-up

2012

Now for the GIVEAWAY! We have two big giveaways, with three winners each!! Every year we’ve been blessed with some incredible sponsors who have been so generous, and this year is no exception. We have some awesome patterns and shop credit for you to win!

Here on my blog, three winners will receive one of three prizes:

  1. $20 from Peek-a-boo Pattern Shop and 1 Bottoms Up Pants PDF Pattern from If Only Designs
  2. 2 PDF patterns of choice from Swoodson Says and 1 Bottoms Up Pants PDF pattern from If Only Designs
  3. 2 PDF patterns of choice from Swoodson Says and 1 Bottoms Up Pants PDF pattern from If Only Designs

handmade gifts for boys giveaway

Click here to enter the giveaway

Then head over to Boy, Oh Boy, Oh Boy Crafts where Stacey is giving away patterns and shop credit from these awesome sponsors:

handmadegiftsforboysgiveawayThanks so much for joining us for Handmade Gifts for Boys again this year! It was so much fun! Happy making :)

Handmade Gifts for Boys Tutorials and Inspiration

Handmade Gifts for Boys Day 3: Snake Stuffie Free Pattern and Tutorial

Welcome back to day three of the Handmade Gifts for Boys series! Awhile back, my six-year-old saw a stuffed snake toy at the zoo, and he cannot stop talking about it. He has been begging me to make one for him. So today I have a free pattern so you can make one too!
Snake softie free pattern and tutorial

Supplies:

  • fleece
  • knit fabric
  • polyfill
  • embroidery thread

1. Embroider eyes onto the snake’s face.

snake stuffie step 1

2. If you want to, embroider a design on the snake’s back.

snake stuffie step 2

3. Put the top and bottom pieces right sides together and sew. Repeat with the snake’s belly

snake stuffie step 5

4. Put the tongue on top of the snake’s face, right side facing the eyes.

snake stuffie step 3

5. Put the top and the belly right sides together.snake stuffie step 4

6. Sew along the outsides, leaving an opening in the center of the snake.

snake stuffie step 6

7. Stuff with polyfill and use a blind stitch to close the opening.

snake stuffie step 7

I can’t handle how adorable this snake is! My little guy is going to love it! The fleece makes it so snuggly.
snake stuffie

Download your free pattern here:

Snake Softie pattern from If Only Designs

Make sure you download it to your computer, don’t print from your browser. Then join the If Only Designs Patterns Facebook group to share your cuddly creation!

Snake Stuffie tutorial

Looking for more softies to sew? Stacey has an awesome roundup of softie patterns, so pop over there to check it out!

softiesewingpatterns

Free Newborn Baby Pants Pattern

My absolute favorite thing to make for new babies is a pair of baby pants. Or three. I make my pants using this tutorial of mine, and now I’ve added a free newborn sized pattern to make it even easier for you!
Free Baby Pants Pattern

Supplies:

  • 1/4 yard of knit fabric
  • 15 inches of 3/4in. non-roll elastic (you may need to adjust this length based on the size of your baby)

For the time being, the pattern will be available for download only in the If Only Designs Facebook Group. Click over and join the group to download!
1. Cut two of the newborn baby pants pattern – make sure to reverse one (hint: fold your fabric wrong sides together, put the pattern piece on top, and cut two pieces)

baby pants 1

2. Fold the leg piece right sides together and sew down the inseam. Repeat with the second leg.

baby pants 2

3. Put one leg inside the other, right sides together. Pin together and sew the crotch seam.

baby pants 4

4. Turn right side out.

baby pants 5

5. Sew the ends of your elastic together with a zig-zag stitch.

baby pants 6

6. Fold the top of the pants down 1in. over the elastic circle. Pin the fabric in place. There are several options for making your waistband casing: use a coverstitch (my preferred method), double needle, or stretch stitch. Whichever you choose, make sure you don’t sew over your elastic. If you want to insert a ribbon/tag, now is the time to do it!

baby pants 7

7. Turn up the bottom of the pants 1/2in. and hem using your preferred method (coverstitch, double needle, or stretch stitch).

baby pants 8

Then admire your itty bitty newborn baby pants!

free baby pants pattern 1

Seriously, what is cuter than a row of baby pants?

free baby pants pattern 3

Well, maybe a baby in the pants! Since I don’t have any more bitty babies in my house, I sent these pants to my lovely friend Jodi at Sew Fearless for her sweeter than sweet baby boy. She shared this picture of him in the pants on her Instagram, and I just about died from the cuteness!

11417402_1473433392977456_1032230684_n

Sew all the baby pants!

free baby pants pattern 2

Download your free newborn baby pants pattern by joining the If Only Designs Facebook Group.

Happy sewing, friends!

FREE Yoga Pants Pattern!

Today I’m over at Melly Sews sharing my Zinnia Jacket as part of the Riley Blake Knit Love blog tour. I’m super excited to take part in the tour on Melissa’s behalf and have the chance to play with some super yummy Riley Blake knits. You can read all about the Zinnia Jacket over on Melissa’s blog, and if you keep reading, you can make your own yoga pants by grabbing your FREE pattern!

FREE Women's Yoga Pants Pattern from If Only They Would Nap

When I decided to make the Zinnia Jacket, I quickly realized it would be a perfect pair with yoga pants. And obviously exercise is so much easier with a cute outfit. The Riley Blake knits are fantastic for this!

DSC_4697

You want to have a solid knit with 40-50% stretch and a good recovery. You can sew this with a serger or with a regular sewing machine, using a zig-zag stitch.

DSC_4686

These pants have an oh so ridiculously comfy fold over yoga waistband and are super quick to sew together. Yoga pants aren’t just for yoga, you know… have you ever slept in yoga pants? SO comfortable! I love that the waistband also gives you a chance to play with accent fabrics, like these fabulous triangles. DSC_4677

Knits are my jam. If you don’t sew with knits often, don’t be scared!! Just give them a try. If I can put my booty on the internet, you can try sewing knits. ;)

You can download your FREE PATTERN here in size medium.
Finished length: 40in. from bottom of waistband to finished hem

After you print and tape your pattern together, cut your fabric out. If the size medium doesn’t fit you, you can use these same instructions to put together your own self-drafted pattern. Just copy a pair of pants you already own and you’ll know they fit you. Just remember to add in some seam allowance.

1. Lay your front and back leg pieces right sides together. Zig-zag or serge along the inseam and the outside of the leg. Repeat with the second leg.

DSC_4848

2. Put the two legs together and line up the crotch seams, right sides together – make sure that the front and back line up. You can easily do this by putting one leg inside the other, right sides together. Sew the two pieces together.DSC_4855

3. Cut two rectangles for the waistband 10.75in (length) by 16.75in (width) – make sure the stretch goes along the width. Sew the short ends together, right sides together.DSC_4858

4. Fold the waistband over.DSC_4859

5. Slide the waistband over the pants and pin together. Sew with a serger or zig-zag stitch.DSC_4863

6. Hem with a one inch hem (or more/less according to your desired length). You can do this with a coverstitch (affiliate link), a double needle, or a stretch stitch.

DSC_4866
Then go for a run! Or cozy up with a good book… I won’t judge. Either way, feel good about your new pants!

DSC_4692
Download your FREE yoga pants pattern here

Happy sewing, friends!